Skip to content Skip to navigation Skip to footer

Installing Fender Flares on an RS1

The above video demonstrates how to install XL Fender Flares, part number 2883488, onto your Polaris RZR RS1. The video shows how to mark holes for the front fender flares (0:59), drill holes in the body (2:15), install the front fender flares (3:04), unstrap the rear fender and mark holes (4:25) and install the rear fender flares.

Always wear safety glasses when installing accessories on your vehicle.

Required Tools and Supplies

  • Safety Glasses
  • Drill
  • Driver
  • 5/16-Inch Drill Bit
  • Push Pin Rivet Pliers
  • TORX® Socket Set

For more information on tools, read Tools and Fasteners Guide.

View the instructions for this kit by searching the Polaris Accessory Installation Instruction Site. The instructions include the part numbers for replacement parts.

To order a part, see your Polaris Dealer. To find a dealer near you, use the Dealer Locator.

TORX® is a registered trademark of Acument Intellectual Properties, LLC.
YouTube® is a registered trademark of Google LLC

Unless noted, trademarks are the property of Polaris Industries Inc.
© 2022 Polaris Inc