The Polaris PRO HD 4,500-Pound Winch with Rapid Rope Recovery is part number 2882240. View the instructions for this kit by searching the Polaris Accessory Installation Instruction Site.
To install a winch on the 2024+ RZR XP, read 2024+ RZR XP Winch Installation.
Installation of a Polaris PRO HD Winch on a RZR XP 1000 includes the following steps:
- 0:35 Preparation
- 0:45 Removal of the driver's side seat
- 1:00 Disconnecting the battery
- 1:30 Removal of the hood
- 1:45 Removal of the center console
- 2:28 Removal of the front winch cover (This will not be reinstalled)
- 2:45 Disconnecting the headlight connectors
- 3:07 Removal of the front grille
- 3:35 Front fascia removal
- 4:40 Installation of the winch mounting bracket
- 6:00 Installation of the winch
- 7:33 Installation of cables
- 8:35 Installation of the autostop fairlead onto the mounting bracket
- 9:28 Installation of the mounting bracket onto the front suspension bracket
- 10:52 Installation of the winch contactor
- 11:55 Routing wires to the contactor
- 12:57 Routing bus box cables
- 17:40 Mounting the control box
- 18:45 Mounting the wireless receiver
- 21:00 Connecting and securing wires
- 26:00 Reinstallation of the upper dash
- 26:50 Reinstallation of the front fascia
- 27:46 Reconnecting the headlight connectors
- 28:05 Reinstallation of the front grille and center console
- 28:25 Installation of the winch hook
- 29:45 Reinstallation of the hood
- 30:00 Reconnecting the battery
- 30:45 Reinstallation of the driver's side seat
- 31:00 Mounting the wireless remote
- 31:30 Testing the wireless remote
For more information, contact your local Polaris Dealer.
YouTube® is a registered trademark of Google LLC
Unless noted, trademarks are the property of Polaris Industries Inc.
© 2022 Polaris Industries Inc.
