Skip to content Skip to navigation Skip to footer
POLARIS OFF-ROAD VEHICLES
HELP CENTER
10/29/2026

2027 RZR Pro R Boost Front Gearcase Fluid Change

Required Tools and Supplies


To change the front gearcase fluid on your RZR Pro R Boost, follow these steps:

1. Park the vehicle on a flat, level surface, ensure the vehicle is in PARK and remove the key. Note: RZR Pro R Boost Ultimate model shown.

2. Place a drain pan underneath the drain plug. Tip: Placing a rag in the bottom of the drain pan will help prevent the splashing of fluid.

3. Clean the area around the fill plug in the right front wheel well.

4. Remove the fill plug using an 8mm Allen socket and set it aside.

5. Clean the area around the drain plug.

6. Remove the drain plug using an 8mm Allen socket and allow the fluid to drain completely.

7. Before reinstalling, clean any dirt or debris from the fill and drain plugs.

8. Inspect both plugs and ensure the sealing surfaces are free of any burrs, nicks or scratches and replace, if necessary.

9. Inspect the O-rings on both plugs and replace, if necessary.

10. Once complete, reinstall the drain plug and torque to 10-14 ft-lbs (14-19 Nm).

11. Add the recommended Angle Drive Fluid (part number 2889280) through the fill plug hole until the fluid is even with the bottom of the fill plug hole. The Angle Drive Fluid capacity is 0.53 qt (500 mL).

12. Reinstall the fill plug and torque to 10-14 ft-lbs (14-19 Nm).

13. Clean any residual fluid around the drain and fill plugs and inspect for leaks.

14. Dispose of the used fluid properly at your local recycling center.
 

For more information, see your authorized Polaris Dealer. Find a dealer near you with the Dealer Locator.
More maintenance tips, procedures and specifications can be found in your Owner's Manual.
To find diagrams and replacement part numbers, use the online parts catalog.

YouTube® is a registered trademark of Google LLC
 

Unless noted, trademarks are the property of Polaris Industries Inc.
© 2026 Polaris Industries Inc.

Keyword(s) front , gearcase , angle , drive , fluid , change , diy , DIY , maintenance ,