Skip to content Skip to navigation Skip to footer
POLARIS OFF-ROAD VEHICLES
HELP CENTER
10/29/2026

2027 Sportsman 600 Universal Bluetooth® Remote by Rockford Fosgate® Installation

To install the Universal Bluetooth® Remote by Rockford Fosgate® (part number 2884987) on your Sportsman 600, follow these steps:

1. Park the vehicle on a flat, level surface, ensure it is in PARK and remove the key. Note: Sportsman 600 Trail with front lid and Stage 2 Rear Audio Box shown.

2. Remove the rubber back cover and locate the two Philips head screws on the side of the unit nearest to the track up and track down buttons. Loosen both screws and gently pull out the battery tray.

3. Insert one (1) CR2032 battery into the tray with the domed negative (-) of the battery facing up. Make sure the positive (+) (flat side) of the battery is facing the same direction as the label on the tray. Slide the tray back into the unit and tighten the two screws.

4. Once installed, the LED will illuminate green to confirm the battery is good and the unit is operational.

5. To mount the remote, use the included hook and loop strap mounting adapter. Hold the rubber side of the adapter against the inside of the handlebar. Wrap the hook and loop strap around the handlebar then insert it through the groove on the opposite side of the adapter. Wrap the strap's extra slack around the handlebar and secure it with the hook and loop strap. Finally, slide the unit into the adapter. Note: DO NOT wrap mounting strap around throttle cable or wires.

6. When using the remote with the steering/bar mount, you will need to attach the back cover. This will cover the battery tray and the back of the remote when not using it in the standalone option. Simply press the rubber studs into the existing holes on the back of the remote to secure it.

7. To release the remote from the handlebar mount, push the tab on the underside of the unit in the direction the arrow is pointing. While holding the tab, pull the unit straight up and out of the mount. If the unit is going to be used standalone and not fixed, included is a flat cover that slides to the unit making it a mobile remote.

8. Press any button on the remote to wake it up. 

  • Open the Bluetooth® setting menu in the device you wish to pair. 

  • Toggle your devices Bluetooth® to 'ON’ if it is not already. 

  • Ensure your device is in search mode and is looking for devices to pair to. 

  • Look for PMX-BTUR and select it. 

  • Pair with the remote. You will see three (3) green flashes from the LED then select pair and exit the settings menu.

For more information, see your authorized Polaris Dealer. Find a dealer near you with the Dealer Locator.

Maintenance tips, procedures and specifications can be found in your Owner's Manual.

To find diagrams and replacement part numbers, use the online parts catalog.

 

YouTube® is a registered trademark of Google LLC
Rockford Fosgate® is a registered trademark of Rockford Corporation
Bluetooth® is a registered trademark of Bluetooth Sig, Inc.
 

Unless noted, trademarks are the property of Polaris Industries Inc.
© 2026 Polaris Industries Inc.