Required Tools and Supplies
8mm Allen Socket
Ratchet
Torque Wrench
Drain Pan
Fluid Filler
Eye Protection
Nitrile Gloves
Shop Rags
To change the transmission fluid on your Sportsman 500, follow these steps:
For optimal performance, always use Polaris recommended fluids as described in your Owner's Manual.
1. Park the vehicle on a flat, level surface, ensure the vehicle is in PARK and set the parking brake.
2. Place a drain pan underneath the drain plug. Tip: Placing a rag in the bottom of the drain pan will help prevent the splashing of fluid.
3. Clean the area around the drain plug.
4. Remove the drain plug with an 8mm Allen socket and allow the fluid to drain completely.
5. Before continuing, clean any dirt or debris from the drain plug.
6. Inspect the O-ring. Looking for any nicks, scratches or burrs and replace, if necessary.
7. Reinstall the drain plug and torque to 12 ft-lbs (16 Nm).
8. Remove the fill plug with an 8mm Allen socket and slowly fill the transmission through the fill plug hole until fluid reaches the bottom of the fill hole threads. The fluid capacity is 32 oz (948 ml). AGL transmission fluid is part number 2878068 for 1 quart, and part number 2878069 for 1 gallon.
9. Before continuing, clean any dirt or debris from the fill plug and inspect the O-ring. Look for any nicks, scratches or burrs and replace, if necessary.
10. Reinstall the transmission fill plug and torque to 12 ft-lbs (16 Nm).
11. Once complete, clean any residual fluid off the vehicle and inspect for leaks.
12. Dispose of the used fluid properly at your local recycling center.
For more information, see your authorized Polaris Dealer. Find a dealer near you with the Dealer Locator.
Maintenance tips, procedures and specifications can be found in your Owner's Manual.
To find diagrams and replacement part numbers, use the online parts catalog.
YouTube® is a registered trademark of Google LLC
Unless noted, trademarks are the property of Polaris Industries Inc.
© 2026 Polaris Industries Inc.