Skip to content Skip to navigation Skip to footer
POLARIS OFF-ROAD VEHICLES
HELP CENTER
10/14/2026

2027 Sportsman 500 Front Gearcase Fluid Change

Required Tools and Supplies

  • 8mm Allen Socket

  • Ratchet

  • Torque Wrench

  • Fluid Filler

  • Drain Pan

  • Angle Drive Fluid

  • Eye Protection

  • Nitrile Gloves

  • Shop Rags

To change the front gearcase or angle drive fluid on your Sportsman 500, follow these steps:

For optimal performance, always use Polaris recommended fluids as described in your Owner's Manual.

1. Park the vehicle on a flat, level surface, ensure it is in PARK and set the parking brake.

2. Clean the area around the fill plug.

3. Remove the fill plug using an 8mm Allen socket and set aside.

4. Place a drain pan underneath the front gearcase. Tip: Placing a rag in the bottom of the drain pan will help prevent the splashing of fluid.

5. Clean the area around the drain plug.

6. Using an 8mm Allen socket, remove the drain plug and allow the fluid to drain completely.

7. Clean any dirt or debris on the drain plug. Inspect the O-ring and replace, if necessary.

8. Continue by installing the drain plug and torque to 18 ft-lbs (25 Nm).

9. Use a funnel or fluid filler to slowly add the proper amount of the recommended fluid. The fluid level should reach the bottom of the fill hole threads. The Angle Drive fluid capacity is 6.8 oz (201 mL).

10. Clean any dirt or debris on the fill plug. Inspect the O-ring and replace, if necessary.

11. Reinstall the fill plug and torque to 18 ft-lbs (25 Nm).

12. Before proceeding, clean any residual fluid off the vehicle and inspect for leaks.

13. Dispose of the used fluid properly at your local recycling center.

For more information, see your authorized Polaris Dealer. Find a dealer near you with the Dealer Locator.
Maintenance tips, procedures and specifications can be found in your Owner's Manual.
To find diagrams and replacement part numbers, use the online parts catalog.

YouTube® is a registered trademark of Google LLC

Unless noted, trademarks are the property of Polaris Industries Inc.
© 2026 Polaris Industries Inc.