Required Tools and Supplies
Flathead Screwdriver
General Purpose Grease
Eye Protection
Nitrile Gloves
Shop Rags
To inspect and replace the air filter on your Sportsman 500, follow these steps:
Note: It is recommended that the air filter is replaced annually. When riding in extremely dusty conditions, replacement is required more often.
1. Park the vehicle on a flat, level surface and ensure the vehicle is in park, set the parking brake, and remove the key.
2. Remove the driver seat.
3. Before continuing, clean the area around the airbox.
4. Remove the six clips from the air box cover and set the cover aside.
5. Inspect the gasket seal for any wear or damage and replace, if necessary. It should adhere tightly to the cover and seal all the way around.
6. Loosen the air filter hose clamp using a flathead screwdriver and remove the air filter assembly.
7. Inspect the air filter for any excessive debris or damage and replace, if necessary. If the air filter has been soaked with fuel or oil, it must be replaced.
8. Before continuing, clean out the inside of the airbox.
9. Reinstall the air filter in the main filter mount ensuring it is fully seated. Note: Apply a small amount of general-purpose grease to the sealing edges to the filter before reinstalling. The air filter should rest on the filter supports. Proper placement of the air filter is important to prevent rattles and air leaks.
10. Place the hose clamp over the assembly and torque to 20 in-lbs (2 Nm).
11. Install the air box cover and secure with the clips.
12. Reinstall the seat and ensure it is seated and secure.
For more information, see your authorized Polaris Dealer. Find a dealer near you with the Dealer Locator.
Maintenance tips, procedures and specifications can be found in your Owner's Manual.
To find diagrams and replacement part numbers, use the online parts catalog.
YouTube® is a registered trademark of Google LLC
Unless noted, trademarks are the property of Polaris Industries Inc.
© 2026 Polaris Industries Inc.