Polaris youth ATVs come equipped with an adjustable speed control system that controls engine RPM and the speed of the vehicle. The speed limiting device may be adjusted by supervising adults when they determine that their child is capable of safely handling additional speed. The dealer cannot remove or adjust any speed limiting device under any circumstances, even at the customer's request, either prior to or after the sale.
Outlaw 50, Outlaw 90, Sportsman 90, Outlaw 110 and Model Year 2017 and Newer Sportsman 110
The speed of youth models is restricted to 10 mph or less for the Y-6+ models and 15 mph or less for the Y-10+ models. The unrestricted top speed is 15 mph or less for the Y-6+ models and 30 mph or less for the Y-10+ models.
Use the following procedure to control how far the throttle opens:
1. Loosen the jam nut (2).
2. Turn the screw (1) inward to reduce speed or outward to increase speed.
3. Tighten the jam nut after adjusting.
Model Year 2016 Sportsman 110
The speed of this vehicle is restricted to under 15 mph (24 km/h) at manufacture. Adjust speed by removing or installing the jumper wire on the terminals located under the seat.
| Jumper Condition | Restricted Maximum Speed of Vehicle |
| Installed | 15 mph (24 km/h) |
| Removed | 29 mph (47 km/h) |
1. Remove the jumper terminal cover.
2. Remove the two screws from the jumper terminal to remove or install the jumper wire.
3. Reinstall the screws.
4. Reinstall the terminal cover.
Outlaw 70
The speed of youth models is restricted to 10 mph or less for the Y-6+ models and 15 mph or less for the Y-10+ models. The unrestricted top speed is 15 mph or less for the Y-6+ models and 30 mph or less for the Y-10+ models.
The throttle adjuster is located behind the left front tire.
To adjust the throttle stop and speed control system:
1. Loosen the throttle adjuster jam nut (1) and turn the stud (2) clockwise to increase vehicle speed.
2. Turn the stud counterclockwise to reduce vehicle speed.
3. After adjusting the stud to the desired vehicle speed, torque the jam nut to 15 ft-lbs (20 Nm).
4. Cycle the throttle lever several times to verify cable function.
Phoenix 200
The speed is limited to 20 mph (32 km/h) when delivered. The speed limiter can be set to increase the maximum speed to 30 mph (48 km/h) or less.
Use the following procedure to reduce or increase speed:
1. Loosen the jam nut (2).
2. Turn the screw (1) inward to reduce speed or outward to increase speed up to 30 mph (48 km/h). The throttle lever will stop against the speed control bracket at the maximum setting.
3. Tighten the jam nut after adjusting.
4. To allow the vehicle to operate to the maximum speed of 38 mph (61 km/h), remove the bracket fastener (3) on the throttle assembly and remove the bracket.
For more information, see your authorized Polaris Dealer. To find a dealer near you, use the Dealer Locator.
Maintenance tips, procedures and specifications can be found in your Owner's Manual.
To find diagrams and replacement part numbers, use the online parts catalog.
Unless noted, trademarks are the property of Polaris Industries Inc.
© 2022 Polaris Inc.
