Pictured below are the lift systems, plow mounts, frames, blade kits, hydraulics (optional), along with a list of accessories and maintenance components for Polaris Pro XD Mid-Size and Full-Size vehicles. Instructions for the kits below can be found on the Polaris Accessory Installation Instruction Site. You may also reference the Pro XD Full-Size Plow Guide, or the Pro XD Mid-Size Plow Guide for a condensed overview of the plow system components for your Pro XD.
To order a replacement part for any aspect of your plow system, take down the part number you wish to purchase and contact your authorized Pro XD Dealer.
Prior to purchasing, always reference the installation instructions to ensure that the kit fits your Pro XD and that you have all of the necessary tools and hardware.
MID-SIZE
LIFT SYSTEM:
4500 lb Winch with Synthetic Rope (Part Number 2889474), includes winch and all necessary parts.
For more information, view the instructions for this part kit by searching the Polaris Accessory Installation Instruction Site. The instructions also list all of the parts included in the kit, their part numbers and which service kits replacements can be found in.
MOUNT:
Glacier Pro HD Plow Mount Quick Release Hook (Part Number 2889577), serves as the connection point for your plow system.
For more information, view the instructions for this part kit by searching the Polaris Accessory Installation Instruction Site. The instructions also list all of the parts included in the kit, their part numbers and which service kits replacements can be found in.
FRAME:
Pro Series Push Frame (Part Number 2880260), connects the plow blade to the vehicle and enables the flit and angle movements.
For more information, view the instructions for this part kit by searching the Polaris Accessory Installation Instruction Site. The instructions also list all of the parts included in the kit, their part numbers and which service kits replacements can be found in.
BLADES:
Pro Series Snow Plow Blade (Part Number 2880269)
For more information, view the instructions for this part kit by searching the Polaris Accessory Installation Instruction Site. The instructions also list all of the parts included in the plow blade kits, their part numbers and which service kits replacements can be found in.
Snow Plow Blade (Part Number 2890335)
For more information, view the instructions for this part kit by searching the Polaris Accessory Installation Instruction Site. The instructions also list all of the parts included in the plow blade kits, their part numbers and which service kits replacements can be found in.
Pro Series Snow Plow Blade (Part Number 2890336)
For more information, view the instructions for this part kit by searching the Polaris Accessory Installation Instruction Site. The instructions also list all of the parts included in the plow blade kits, their part numbers and which service kits replacements can be found in.
Accessories
- Pro Series Plow System with Hydraulics (Part Number 3880006)
- Coil Spring Spacers (Part Number 2872655)
- Heavy-Duty Snow Plow Deflector - 72" (Part Number 2884160)
- Plow Blade Snow Deflector - 66" (Part Number 2879866)
- Back Drag Bar (Part Number 2889329) (for 72” plow blade only)
- 6" Plow Extensions (Part Number 2889328) (fits 66" & 72" plow blades)
- Plow Markers- Pair (Part Number 2872726)
Maintenance
- Replacement 72” Wear Bar (Part Number 2879875)
- Replacement 66” Wear Bar (Part Number 2879868)
- Replacement Plow Link (Part Number 2205057)
- Replacement Shear Pins (Part Number 2205527) (manual angle system only)
- Replacement Quick-Release Skid Shoes (Part Number 2208864)
- HD Kickstand System (Part Number 2207382)
FULL-SIZE
LIFT SYSTEM:
6000 lb Winch (Part Number 2884248), includes winch and all necessary parts.
For more information, view the instructions for this part kit by searching the Polaris Accessory Installation Instruction Site. The instructions also list all of the parts included in the kit, their part numbers and which service kits replacements can be found in.
MOUNT:
Pro Series Plow Mount (Part Number 2879106), serves as the connection point for your plow system.
For more information, view the instructions for this part kit by searching the Polaris Accessory Installation Instruction Site. The instructions also list all of the parts included in the kit, their part numbers and which service kits replacements can be found in.
FRAME:
Pro Series Plow Frame with Bumper Catch (Part Number 2891551), connects the plow blade to the vehicle and enables the flit and angle movements.
For more information, view the instructions for this part kit by searching the Polaris Accessory Installation Instruction Site. The instructions also list all of the parts included in the kit, their part numbers and which service kits replacements can be found in.
In the event of a collision with an obstacle at a speed greater than what the system is rated for, the angle selection T-Pin of the manual angulation mechanism is designed to shear to minimize the force of impact to the pushframe. If the angle selection T-pin is broken, inspect all components of the plow system to see if any other system components have been damaged. If a part is damaged, the impact speed was greater than what the system is designed to support. You must then buy a replacement from your dealer.
Should you need to replace the angle selection T-Pin, a spare pin is provided in the angle lever. Follow the steps below to change your T-Pin:
1. Remove the R-Pin (62) and the clevis pin (61) that keep the angle lever (28) in place.
2. Lift the angle lever and remove the spare T-Pin (31).
3. Remove the two tension springs (39) retaining the T-Pin.
4. Remove the two pieces of broken T-Pin.
5. Insert the new T-Pin.
6. Replace the angle lever.
7. Reinstall the clevis pin and the R-Pin.
8. Reinstall the two tension springs.
Important Notes: Visit your authorized Polaris Dealer to order a new T-Pin, part number 2204829, and replace the original spare you just removed in the event of an additional hard impact failure. The T-Pin is designed only to protect against the impacts affecting right and left ends of the blade. The T-Pin does not protect the system from a central impact. Always inspect the entire system in the event of a hard impact to ensure that no damage occurred to any system components other than the T-Pin.
BLADES:
Pro Series Snow Plow Blades (Part Number 2879317)
For more information, view the instructions for this part kit by searching the Polaris Accessory Installation Instruction Site. The instructions also list all of the parts included in the plow blade kits, their part numbers and which service kits replacements can be found in.
Pro Series Snow Plow Blades (Part Number 2890334)
For more information, view the instructions for this part kit by searching the Polaris Accessory Installation Instruction Site. The instructions also list all of the parts included in the plow blade kits, their part numbers and which service kits replacements can be found in.
ACCESSORIES:
- Pro Series Plow Hydraulic Angle System (Part Number 2889029), requires a Plow System Power Controller (Part Number 2883247)
- Heavy-Duty Snow Plow Deflector - 72" (Part Number 2884160)
- Back Drag Bar (Part Number 2889329) (for 72” plow blade only)
- 6" Plow Extensions (Part Number 2889328) (fits 66" & 72")
- Plow Markers- Pair (Part Number 2872726)
MAINTENANCE:
- Plow Kickstand System (Part Number 2207382)
- Replacement 72” Wear Bar (Part Number 2879875)
- Replacement Quick-Release Skid Shoes (Part Number 2208864)
- Replacement Shear Pins (Part Number 2205527) (manual angle system only)
- Replacement Plow Link (Part Number 2204974)
HYDRAULICS (Optional)
Hydraulics are optional and not required for use of a plow with your Pro XD.
Pro Series Plow Hydraulic Lift System (Part Number 2889058)
For more information, view the instructions for this part kit by searching the Polaris Accessory Installation Instruction Site. The instructions also list all of the parts included in the kit, their part numbers and which service kits replacements can be found in.
Pro Series Plow Hydraulic Angle System (Part Number 2889029)
For more information, view the instructions for this part kit by searching the Polaris Accessory Installation Instruction Site. The instructions also list all of the parts included in the kit, their part numbers and which service kits replacements can be found in.
Note: Use of the hydraulic angle system also requires purchase of a Plow System (frame, lift method and blade) and a Plow Controller (part number 2883247).
Plow System Power Controller (Part Number 2883247)
For more information, view the instructions for this part kit by searching the Polaris Accessory Installation Instruction Site. The instructions also list all of the parts included in the kit, their part numbers and which service kits replacements can be found in.
To order service and maintenance parts for your Pro XD, view the parts catalog.
For more information or to order accessories, see your authorized Pro XD Dealer. Find a dealer near you with the Dealer Locator.
Unless noted, all trademarks are the property of Polaris Industries Inc.
© 2024 Polaris Industries Inc.
