Passer au contenu de la page Passer à la navigation Passer au pied de page
POLARIS OFF-ROAD VEHICLES
CENTRE D'AIDE
04/18/2024

Connecting Bluetooth® Devices to the 2017-2018 7" Display Powered by RIDE COMMAND

You can connect a headset or mobile device to the 2017-2018 7" Display powered by RIDE COMMAND with Bluetooth®. Once your phone is connected, you will be able to play music via Bluetooth® through your vehicle. When both a headset and mobile device are connected, you can make and receive calls and text messages through the display. 

Note: To make and receive phone calls, a headset MUST be paired to the vehicle. 

Headset Pairing
The display can connect with Polaris approved Bluetooth® headsets to listen to music, take phone calls and communicate with other riders wearing headsets. Other Bluetooth® headsets and speakers may work, but they have not been rested, therefore support can't be offered. For pairing information, refer to the manufacturer's instructions. 

To connect a Bluetooth® device to your display, follow these steps:

1. From the Device Manager menu, press "Add Device."

2. Turn your Bluetooth® device on and put it in phone pairing mode. 

3. When the device appears on the display, press the "+" icon on the screen. This should pair the display and device, and you will see the headset icon in the upper left-hand corner of the display screen. 

4. When you return to the Device Management menu, you can use the icon below the headset name to switch between the connected device and vehicle speakers (if available). 

For more information, watch the video below.

iPhone® Pairing
To pair an iPhone® to your 2017-2018 7" Display powered by RIDE COMMAND, follow these steps: 

1. On the display, press the Phone button from the row of buttons underneath the display. 

2. Select the Bluetooth® button that is underneath the phone icon. 

3. You will be prompted to ensure that your Bluetooth® is enabled and your phone is discoverable to new devices. Press OK. 

4. A list of nearby devices will appear on the screen. Select the "+" next to your phone. 

5. A pairing code will appear on the display and on your mobile device. Press PAIR/OK on both to confirm pairing. Once the phone has been successfully paired, the screen will say CONNECTED above your device's name and a phone icon will appear in the top-left corner of the screen. 

For more information, watch the video below. 

Android® Pairing
To connect your Android® device to the 2017-2018 7" Display powered by RIDE COMMAND, follow these steps: 

1. On the display, press the Phone button from the row of buttons underneath the display. 

2. Select the Bluetooth® button that is underneath the phone icon. 

3. You will be prompted to ensure that your Bluetooth® is enabled and your phone is discoverable to new devices. Press OK. 

4. A list of nearby devices will appear on the screen. Select the "+" next to your phone. 

5. Confirm pairing on your device and select OK/ALLOW for each prompt that appears. Once the phone has been successfully paired, the screen will say CONNECTED above your device's name and a phone icon will appear in the top-left corner of the screen. 

For more information, watch the video below. 

Visit the Tutorials section of the RIDE COMMAND website for more information and the full library of five-button video tutorials. 
To browse all RIDE COMMAND articles, read Guide to RIDE COMMAND for Off-Road Vehicles.
The Polaris App is available on the App Store® for iPhone® and iPad® and on Google Play®.
Visit the RIDE COMMAND website for additional information about features, displays and software/map updates.

Google Play®, Android® and YouTube® are registered trademarks of Google LLC
Bluetooth® is a registered trademark of Bluetooth Sig, Inc.

iOS® is a registered trademark of Cisco Technology, Inc.
App Store®, iPhone® and iPad® are registered trademarks of Apple Inc.

Unless noted, trademarks are the property of Polaris Industries Inc.
© 2023 Polaris Industries Inc. 

Mots-clés phone , iphone , android , instructions , pairing , headset ,