For information on tools, read the Tools and Fasteners Guide. Always wear safety glasses and nitrile gloves when servicing your Polaris Pro XD.
To operate the charging system on your Pro XD Full-Size Kinetic, follow these steps:
Your Polaris Electrical Vehicle (EV) can receive a charge from multiple kinds of power sources:
| Power Sources |
| 120V wall outlet |
| 240V wall outlet |
| J1772 Level 1 (120V) public charging stations |
| J1772 Level 2 (240V) public charging stations |
| Type 1 electrical outlet (Australia and New Zealand) |
Important: Your vehicle is not compatible with Level 3 public charging stations. Do not attempt to charge your vehicle using a Level 3 charge station.
1. Park the vehicle on a flat, level surface, ensure the vehicle is in PARK and remove the key.
2. Open the charge compartment door. Note: Make sure to wipe away any accumulated mud or debris in or around the charge compartment. Do not use tools to clean terminals. Use compressed air, cloth or (if necessary) low pressure water to clean the charge compartment.
3. Open the charge port cover and insert the Electrical Vehicle Supply Equipment (EVSE) charging plug into the charger socket until you hear an audible “click” sound.
| Once Charging Begins |
| The vehicle display will switch to the charging screen. |
| The vehicle will charge continuously until fully charged. |
| The vehicle will not be drivable while the EVSE charging plug is connected. |
| The charge performance may vary as a result of ambient temperatures affecting internal battery temperature. |
Note: Refer to your Owner's Manual for charging best practices.
4. Remove the EVSE charging plug.
5. Reattach the charge port cover and close the charge compartment door. Note: Operating the vehicle with the port cover or compartment lid open may allow dirt and debris to enter the charging terminals.
6. The high-voltage battery pack on your vehicle is equipped with automatic heaters that sense when the battery’s internal temperature is below 10 degrees Celsius or 50 degrees Fahrenheit. This allows your vehicle to operate normally in below-freezing conditions.
7. If the battery temperature falls below 10 degrees Celsius or 50 degrees Fahrenheit, the battery heaters will activate when the vehicle is charging or the key switch is in the ON position.
Maintenance tips, procedures and specifications can be found in your Owner's Manual.
YouTube® is a registered trademark of Google LLC
Unless noted, trademarks are the property of Polaris Industries Inc.
© 2024 Polaris Industries Inc.
