The Polaris Sportsman Boom Sprayer is part number 2882266.
The carton includes a 15-gallon tank, 2-nozzle spray boom and all hardware necessary to assemble your sprayer. This accessory is compatible with most model year 2014 and newer Polaris Sportsman ATVs. For more information on whether the sprayer is compatible with your vehicle, use the vehicle fitment tool or see your Polaris Dealer.
Assembling Your Sprayer
Before assembling your sprayer, make sure the contents of the sprayer kit match the items shown below. The kit should include a tank/frame pre-assembly (2), an Owner's Manual (2), two-nozzle rigid boom (3), tank lid and lanyard (4), parts bag (5) and bracket kit (6).
Caution: When fully filled, the sprayer will weigh 165 pounds. Consult your vehicle's Owner's Manual to verify that you are within the load-carrying capacity. 
The sprayer is mounted to the ATV with the pump assembly at the operator's back and the spray wand at the rear of the unit. Right- and left-hand sides of the unit are determined as if you are standing behind the sprayer and looking at it. Remove the tank from the box and turn it upside down on a flat surface. You are now ready to assemble your accessory sprayer. Step-by-step instructions for assembly can be found in the sprayer's Owner's Manual.
You will need the sprayer accessory carton, a Phillips screwdriver and ratchet straps for assembly.
Replacement Parts for Your Sprayer
The following tables list the parts included in the sprayer kit. Identification numbers correspond to the diagrams above each table. To order a part, see your Polaris Dealer.
Parts Bag (Part Number 5280984)
| Item | Part Number | Description | Quantity |
|---|---|---|---|
| 1 | 5278114 | Lead Wire Assembly w/ 15A Fuse & 30A Clips (96 in Long) | 1 |
| 1.1 | 5157238 | 15 Amp Regular Blade Fuse | 1 |
| 2 | 5273212 | 5 ft Extension Cable | 1 |
| 3 | 5167097 | 2 in Dry 100# Back Mount Gauge | 1 |
| 4 | 5051144 | Hose Clamp, 3/8 in | 2 |
| 5 | 5053112 | Handgun Clip - Deluxe | 2 |
| 6 | 5117334 | #10-24 x 1/2 in Machine Screw, Phillips Round Head | 2 |
| 7 | 5117287 | 1/4"-20 x 3/4 in Phillips Truss Head Machine Screw | 2 |
| 8 | 5006306 | 1/4-20nc Hex Flanged Whiz Nut Gr. 5 | 2 |
| 9 | 5034149 | 5/16-18nc x3/4 in Ig Flat Head Screw (100) W/Locking Patch | 4 |
Bracket Kit (Part Number 5278140)
| Item | Part Number | Description | Quantity |
|---|---|---|---|
| 1 | 5278222 | Quick Release Bracket Assembly | 2 |
| 2 | 5038874 | Quick Release Bracket - Flat | 2 |
| 3 | 5020538 | Hose, 3/8 in-1 Brd. x 43 in | 1 |
Pump Model (Part Number 5277981)
| Item | Part Number | Description | Quantity |
| 1 | 5157205 | 7.5 Amp Mini Blade Fuse | 1 |
| 2 | 5157202 | Pressure Switch Assembly | 1 |
| 3 | 5168839 | Plunger Kit | 1 |
| 4 | 5168837 | Upper Housing Assembly | 1 |
| 5 | 20408-000 | Pkg. (2) Clips (Port Fitting) | 1 |
| 6 | 5168820 | Check Valve Kit (with O-ring) | 1 |
| 7 | 5168838 | Diaphragm/Piston/Cam/Bearing Kit | 1 |
| 8 | 5095202 | Mounting Feet (Pkg of 4) | 1 |
Tank/Frame Pre-Assembly (Part Number 5302892)
| Item | Part Number | Description | Quantity |
| 1 | 5169242 | 15 Gallon Tank (White) | 1 |
| 2 | 5058188 | Tank Lid with Lanyard | 1 |
| 3 | 5278222 | ATV Quick Release Bracket Assembly | 2 |
| 3.1 | 5078223 | Cam Handel Assembly - for Quick Release Boom | 1 |
| 4 | 5034149 | 5/16-18nc x 3/4 in Ig Flat Head Screw (100) with Locking Patch | 4 |
| 5 | 5038874 | Quick Release Boom Mount Bracket - Fixed Height | 2 |
| 6 | 5117287 | 1/4 in-20 x 3/4 in Phillips Truss Head Machine Screw | 2 |
| 7 | 5006306 | 1/4-20nc Hex Flanged Whiz Nut Gr. 5 | 2 |
| 8 | 5100452 | Siphon Tube | 1 |
| 9 | 5275877 | Intake Sub-Assembly | 1 |
| 9.1 | 5168833 | Port Kit Fitting, 1/2 in Hose Barb | 1 |
| 9.2 | 5020557 | 1/2 in Polyspring Hose x 5-1/4 in | 1 |
| 9.3 | 5051114 | Hose Clamp, 1/2 in | 2 |
| 9.4 | 5006209 | Poly Knurled Swivel Nut, 3/4 in FGHT | 1 |
| 9.5 | 5149035 | Poly Swivel, 1/2 in Hose Barb | 1 |
| 9.6 | 5116242 | Strainer, 1 in Filter Washer | 1 |
| 9.7 | 5143419 | Swivel Shut-Off | 1 |
| 10 | 5273959 | Deluxe Pistol-Grip Handgun with X-26 Tip | 1 |
| 10.1 | 5018331 | X-26 Adjustable Brass Tip Nozzle | 1 |
| 11 | 5278348 | Deluxe Wand Clips and Screws (Pkg/2) (#10-24 Thread) | 1 |
| 12 | 5020524 | Hose, 3/8 in-1 Brd. x 15 ft | 1 |
| 13 | 5051144 | Hose Clamp, 3/8 in | 4 |
| 14 | 5020538 | Hose, 3/8 in- Brd. x 43 in | 1 |
| 15 | 5143430 | Flat Washer - Hose Barb Seal | 1 |
| 16 | 5143429 | QC Manifold - QC Quarter-Turn Cap | 1 |
| 17 | 5100804 | Rigid By-Pass Tube Assembly | 1 |
| 18 | 5075018 | Grommet, 1/2-in ID | 1 |
| 19 | 5302793 | Quick Connect Manifold Assembly | 1 |
| 19.1 | 5302347 | Quick Connect Manifold | 1 |
| 19.2 | 5143422 | QC Manifold - Support Bracket | 1 |
| 19.3 | 5143430 | Flat Washer - Hose Barb Seal | 2 |
| 19.4 | 5143431 | QC Manifold - 3/8 in Hose Barb - Straight | 2 |
| 19.5 | 5143429 | QC Manifold - QC Quarter-Turn Cap | 2 |
| 20 | 5167097 | 2 in Dry 100# Back Mount Gauge | 1 |
| 21 | 5277981 | High Flo Gold Series 2.1 GPM Pump | 1 |
| 22 | 5117167 | #10-24 x 5/8 in Phillips Truss Head Machine Screw | 3 |
| 23 | 5117168 | #10-24 x 1 in Phillips Truss Head Machine Screw | 1 |
| 24 | 5274373 | Drain Plug Cap, Tether and Washer Assembly | 1 |
| 25 | 5278114 | Lead Wire Assembly with 15A Fuse and 30A Clips (96 in Long) | 1 |
| 25.1 | 5157238 | 15 Amp Regular Blade Fuse | 1 |
| 26 | 5273212 | 5 ft Extension Cable | 1 |
| 27 | 5051122 | 5/8 in Black Nylon Loom Cable Clamp | 1 |
| 28 | 5117234 | #10-24 x 1/2 in Phillips Truss Head Machine Screw | 1 |
| 29 | 5278237 | Rigid 2-Nozzle ATV - 15/20 Boom Assembly | 1 |
Two-Nozzle Boom Assembly (Part Number 5278237)
| Item | Part Number | Description | Quantity |
| 29 | 5278237 | Rigid 2-Nozzle ATV - 15/20 Boom Assembly | 1 |
| 29.1 | 5095377 | Boom Mount Angle - 2 Nozzle (Quick Release) | 1 |
| 29.2 | 5133094 | Nylon Cable Tie | 2 |
| 29.3 | 5053110 | Plastic Retaining Clip (14 and 16 GA) | 2 |
| 29.4 | 5277692 | 2-Nozzle Harness (3/8 in) | 1 |
| 29.4.1 | 5277688 | ELL Nozzle Sub-Assembly (3/8 in) | 2 |
| 29.4.1.1 | 5056113 | Single Hose Shank (3/8 in Hose) | 1 |
| 29.4.1.2 | 5116019 | Nozzle Strainer, Red (50 Mesh) | 1 |
| 29.4.1.3 | 5016157 | Seat Washer (QJ Caps) | 1 |
| 29.4.1.4 | 5018274 | Turbo FloodJet Tip (TF-VP3) | 1 |
| 29.4.1.5 | 5046251 | QJ Cap Only (Black) | 1 |
| 29.4.2 | 5020531 | Hose, 3/8 in - 1 Brd. x 19-3/8 in NBR and PVC | 2 |
| 29.4.3 | 5051144 | Hose Clamp, 3/8 in | 4 |
| 29.4.4 | 5086025 | Poly Hose Tee, 3/8 in HB | 1 |
For more information on the operation, maintenance, cleaning and storage of your ATV lawn and garden sprayer, consult the sprayer's Owner's Manual.
Unless noted, trademarks are the property of Polaris Industries Inc.
© 2022 Polaris Industries Inc.
