Listed below are the plow mount, frame and blade kits for Polaris RZR vehicles. Installation instructions are linked as well, which list the individual parts in each kit.
To order a replacement part for any aspect of your plow system, see your authorized Polaris Dealer. If you need a part not listed, also consult your Polaris Dealer.
Prior to purchasing, always check the installation instructions to ensure that the kit fits your RZR and that you have all of the necessary tools and hardware. To only view kits that fit your vehicle, visit the Accessories section of the RZR website and use the fitment tool, shown below, at the top of the page.
SYSTEMS
Glacier HD Plow System (Part Number 3880017)
Installation instructions for the whole system are not available at this time. Installation instructions for each part of the system can be found on the product page. These instructions also list all of the parts included in the kits, their part numbers and which service kits replacements can be found in. The kit includes: Glacier Pro Plow Mount (part number 2884764), Glacier Pro HD Push Frame (part number 2880260) Glacier Pro Plow Blade - 66" Poly (part number 2880269) and Glacier Plow Markers - Pair (part number 2872726). To order a part or kit, see your Polaris Dealer.
MOUNTS
Glacier Pro Plow Mount (Part Number 2884764)
For more information, view the instructions for each part of this kit by searching the Polaris Accessory Installation Instruction Site. These instructions also list all of the parts included in the plow mount kits, their part numbers and which service kits replacements can be found in. To order a part or kit, see your Polaris Dealer.
Discontinued: Glacier Pro Plow Mount (Part Number 2880262). For more information, view the installation instructions.
FRAMES
Lock & Ride Glacier II Pushframe (Part Number 2878822)
For more information, view the installation instructions. These instructions also list all of the parts included in the plow frame kits, their part numbers and which service kits replacements can be found in. To order a part or kit, see your Polaris Dealer.
Glacier Pro HD Plow Frame (Part Number 2880260)
For more information, view the instructions for each part of this kit by searching the Polaris Accessory Installation Instruction Site. These instructions also list all of the parts included in the plow frame kits, their part numbers and which service kits replacements can be found in. To order a part or kit, see your Polaris Dealer.
In the event of a collision with an obstacle at a speed greater than that recommended for the system, the shear pin (part number 2205527) of the manual angle mechanism will break to minimize the force of impact in the frame.
If the shear pin is broken, inspect the plow system for damaged parts. If any part is damaged, the impact velocity was greater than what the system is designed to support. You must then buy a replacement part from your Polaris Dealer.
If only the shear pin is broken, the pin can be removed and installed upside down and used again. Follow these steps to change the pin:
1. Using a long nose pliers, remove the two tension springs (21) and then remove the pin (34) retaining the angle lever (30).
2. Remove the half-broken shear pin (33) and reinsert it upside down. You can get a new spare pin, part number 2205527, from your dealer.
3. Align the hole in the shear pin with the slot in the angle lever and insert the pin securing the parts in place.
4. Use a long nose pliers to reinstall the two tension springs completing the assembly.
Note: The shear pin is designed only to protect against the impacts affecting right and left ends of the plow. The pin does not protect the system from a center impact. Always inspect the entire plow system after a shear pin has failed to ensure no other components were damaged by the impact.
BLADES
Glacier Pro Plow Blade - 66-Inch Poly (Part Number 2880269)
For more information, view the instructions for each part of this kit by searching the Polaris Accessory Installation Instruction Site. These instructions also list all of the parts included in the plow blade kits, their part numbers and which service kits replacements can be found in. To order a part or kit, see your Polaris Dealer.
Glacier Pro Plow Blade - 66-Inch Steel (Part Number 2890336)
For more information, view the instructions for each part of this kit by searching the Polaris Accessory Installation Instruction Site. These instructions also list all of the parts included in the plow blade kits, their part numbers and which service kits replacements can be found in. To order a part or kit, see your Polaris Dealer.
ACCESSORIES
- Glacier Pro HD Plow Extension (Part Number 2880267).
- Plow Marker Kit (Part Number 2872726)
- 66-Inch Hardened Wear Bar Kit (Part Number 2879868)
- 66-Inch Rubber Deflector Flap Kit (Part Number 2879866)
For more information, view the instructions for each part by searching the Polaris Accessory Installation Instruction Site.
For more on Polaris plow systems, listen to the The What, How and Why of Snow Plowing episode of the Polaris Podcast.
For more information, see your authorized Polaris Dealer. Find a dealer near you with the Dealer Locator.
To find replacement parts, view the online parts catalog.
Unless noted, trademarks are the property of Polaris Industries Inc.
© 2022 Polaris Industries Inc.