Passer au contenu de la page Passer à la navigation Passer au pied de page
MOTONEIGE POLARIS
CENTRE D'AIDE
03/01/2024

Shield Replacement on Modular Helmets

To remove and install the visor and sunshield on a Polaris modular helmet, follow these steps.

1. To remove the outer shield:

  • Start by opening the visor fully.
  • Then, pull the latch downward and lift the visor outward to release the lock tab from the latch.
  • Move over to the other side of the helmet and release the lock tab.
  • Pull the visor out and remove from the helmet.

2. To remove the inner sunshield:

  • Start by lowering the inner sunshield fully.
  • Press the tabs on each side the sunshield to release the shield from the inner brackets.
  • Pull the sunshield out and remove from the helmet.

3. To install the inner sunshield:

  • Start by inserting one tab into the inner bracket until there is an audible click.
  • Move to the other side of the shield and insert the tab on the inner bracket.
  • Verify proper operation of the sunshield by operating the tab on the side of the helmet.

4. To install a new outer shield:

  • Insert the visor tab into the upper circular notch and press the lower tab into the latch until the shield locks into place with an audible click.
  • Move over to the other side of the helmet and secure the upper circular notch and lower tab.
  • After completing, verify proper operation of the visor.

For more information, see your authorized Polaris Dealer. To find a dealer near you, use the Dealer Locator.

YouTube® is a registered trademark of Google LLC

Unless noted, trademarks are the property of Polaris Industries Inc.
© 2022 Polaris Industries Inc.