Passer au contenu de la page Passer à la navigation Passer au pied de page
MOTONEIGE POLARIS
CENTRE D'AIDE
11/06/2024

Heated Seat Installation

The following video demonstrates how to install the Heated Seat (part number 2882819) on your Polaris snowmobile. The video includes removing the side panels and hood (0:40), disconnecting the battery cables (1:09), removing the seat (1:37), locating the connection for the seat (2:05), removing the intermediate plenum and upper intake plenum (2:17), removing the console (3:03), locating the harness connection (4:15), installing the switch (4:39), reinstalling the console (6:20), installing the new seat (7:42), reinstalling the upper plenum and intermediate plenum (8:38), reinstalling the battery (9:21), reinstalling the hood and side panels (9:34) and testing the heated seat (10:01).

To install the seat, you'll need a 5/32-inch drill bit, drill, flat file, slip joint pliers, metric socket set, TORX® bit socket set, torque wrench and metric wrench set.

View the instructions for this kit by searching the Polaris Accessory Installation Instruction Site.

For more information, see your authorized Polaris Dealer. Find a dealer near you through the Dealer Locator.
Maintenance tips, procedures and specifications can be found in your Owner's Manual.
To find diagrams and replacement part numbers, use the online parts catalog.

TORX® is a registered trademark of Acument Intellectual Properties, LLC
YouTube® is a registered trademark of Google LLC

Unless noted, trademarks are the property of Polaris Industries Inc.
© 2022 Polaris Industries Inc.