Required Tools and Supplies
- 8mm Allen Socket
- Ratchet
- Torque Wrench
- Drain Pan
- Fluid Filler
- AGL Transmission Fluid
- Eye protection
- Nitrile Gloves
- Shop Rag
For information on tools, read the Tools and Fasteners Guide. Always wear safety glasses and nitrile gloves when servicing your Polaris Sportsman.
To change the transmission fluid on your Sportsman X2, Touring and 6x6 570, follow these steps:
For optimal performance, always use Polaris recommended fluids as described in your Owner's Manual.
1. Park the vehicle on a flat, level surface, ensure the vehicle is in PARK and set the parking brake.
2. Properly lift and elevate the vehicle. Reference the Owner's Manual for proper lifting techniques.
3. Remove the rear right wheel to gain access to the drain plug.
4. Place a drain pan underneath the drain plug. Tip: Placing a rag in the bottom of the drain pan will help prevent the splashing of fluid.
5. Clean the area around the drain plug.
6. Remove the drain plug with a 8mm Allen socket and allow the fluid to drain completely.
7. Clean any dirt or debris from the drain plug.
8. Inspect the O-ring. Looking for any nicks, scratches or burrs and replace, if necessary. A new drain plug is part number 3233794.
9. Reinstall the drain plug and torque to 12 ft-lbs (16 Nm).
10. If previously removed, reinstall the right rear wheel and torque to 30 ft-lbs (41 Nm) + 70 degrees.
11. If needed, remove the left rear wheel to gain access to the fill plug.
12. Remove the fill plug with a 8mm Allen socket. Add 32 fl oz (948 ml) of AGL Transmission Fluid through the fill plug hole until fluid reaches the bottom of the fill hole threads. 1 quart of AGL Fluid is part number 2878068. 1 gallon of AGL Fluid is part number 2878069.
13. Clean any dirt or debris from the fill plug and inspect the O-ring. Look for any nicks, scratches or burrs and replace, if necessary. A new fill plug is part number 3233794.
14. Reinstall the transmission fill plug and torque to 12 ft-lbs (16 Nm).
15. Clean any residual fluid off the vehicle and inspect for leaks.
16. If previously removed, reinstall the rear left wheel and torque to 30 ft-lbs (41 Nm) + 70 degrees.
17. Dispose of the used fluid properly at your local recycling center.
For more information, see your authorized Polaris Dealer. Find a dealer near you with the Dealer Locator.
Maintenance tips, procedures and specifications can be found in your Owner's Manual.
To find diagrams and replacement part numbers, use the online parts catalog.
YouTube® is a registered trademark of Google LLC
Unless noted, trademarks are the property of Polaris Industries Inc.
© 2024 Polaris Industries Inc.
