Installing a Polaris PRO HD Winch with Rapid Rope Recovery on your RANGER 500 or 570 includes the following steps:
- Preparation (:53)
- Removing the driver's seat (1:05)
- Disconnecting the battery (1:15)
- Removing the front bumper assembly (2:05)
- Opening the hood (3:29)
- Removing the drive shaft cover (3:43)
- Routing the battery power cables (4:22)
- Mounting the winch contactor (7:25)
- Installing cables (8:30)
- Installation of the winch mounting bracket onto the front bumper assembly (11:18)
- Installation of the grille and autostop fairlead (12:55)
- Installation of the winch on the winch mounting bracket (14:28)
- Installation of the winch hook (16:07)
- Reinstallation of the front bumper assembly (18:22)
- Routing cables (20:10)
- Installation of the control box and wireless remote receiver (23:00)
- Routing wires (26:03)
- Inspection of the wiring (29:34)
- Reinstallation of the drive shaft cover (30:49)
- Reconnecting the battery (31:30)
- Reinstallation of the driver's seat (33:05)
- Closing the hood (33:15)
- Mounting the wireless remote (33:25)
- Testing the winch and remote operation (34:05)
For more information about Polaris winches, visit your local Polaris Dealer.
The Polaris PRO HD 4,500-Pound Winch with Rapid Rope Recovery is part number 2882238. Read the installation instructions before installing. For more information, view the instructions for this part by searching the Polaris Accessory Installation Instruction Site.
YouTube® is a registered trademark of Google LLC
Unless noted, trademarks are the property of Polaris Industries Inc.
© 2022 Polaris Industries Inc.
