The AXYS® RMK® features a patented, raised chassis that increases clearance and reduces drag to keep you on top of the snow. This new chassis, purpose built for mountain riding, allows for improved sidehilling, faster and easier climbing, and instantaneous lift allowing the sled to pop onto the snow faster. The carbon fiber overstructure offers reduced weight without compromising strength. New, taller spindles for 2016 increases clearance to reduce drag.
The new lightweight, rigid rear suspension design features revised geometry to control pitch. This improves weight transfer, delivering better control and a more compliant ride. The rigid suspension delivers power directly to the snow. Off-trail, riders will notice improved weight transfer while maintaining the approach angle. On-Trail, riders will notice a more compliant and comfortable ride. The rear suspension features a new rail design that helps lift the rear skid while driving it forward.
Developed in conjunction with the AXYS platform, the proven 800 Cleanfire® H.O. Engine delivers +10% increase in power-to-weight ratio and quicker throttle response to generate instantaneous lift. The integrated mounting position optimizes the balance of the chassis. Featuring:
3-stage electronically-controlled exhaust valves provide improved running quality, crisper throttle response, smoother idle and improved fuel economy. The active feedback for the exhaust valve position provides more accurate fueling in transient situations. These exhaust valves also improve combustion stability, leading to improved durability and engine life.
Lightweight crankshaft weighs 2.5 lbs less, delivering 25% lower inertia and quicker throttle response and spooling. This provides improved acceleration. Designed and engineered specifically for the 800 Cleanfire® H.O. Engine for increased durability, this same lightweight crankshaft is used in Polaris Race sleds since the 2013-14 and 2014-15 season, showing it's proven durability.
The QuickDrive™ Low Inertia System is designed to make the sled rev quicker for instantaneous lift and reduces rotational inertia by 21% for easier handling and flickability.Not simply a belt-drive, it is a complete lightweight drive system — featuring an extruded drive shaft, lightweight brake, RMK-specific brake caliper and of course the most visible piece of the system — a maintenance-free belt drive that requires no oil or tensioner system. The complete system reduces rotational inertia by 21% which means 5lb. less effort when carving.
PRO-RMKs come standard with Walker Evans® Monotube Shocks. During SnowCheck, there is a choice of a premium Walker Evans® Piggyback Clicker shock or the Walker Evans® Monotube Shocks. The new Walker Evans® Piggyback Clicker Shocks with compression adjusters and remote reservoirs offers the best performance across the broadest range of conditions. The new Walker Evans®Monotube Impact-Extruded Shocks are the lightest weight shock option from Polaris for those riders counting ounces. The one-piece, simple design is lightweight yet durable.
Polaris snowmobiles are the lightest sleds on the mountain. Polaris mountain sleds have always been light AND rigid, and for 2016 Polaris has added strength & durability while reducing weight on the RMK® AXYS® platform. Polaris uses design optimization software to analyze the loads and stress points for various systems and components of the snowmobile which allows the team to design lightweight yet durable snowmobiles. Providing riders with instantaneous lift, Polaris sleds help riders get up on top of the snow faster due to the lighterweight, increase in power from the new 800 H.O. Cleanfire® engine, new Polaris-exclusive track designs and the new raised chassis.
Polaris continuously pursues new innovations and technology, and for 2016 the Polaris® RMK® features an industry-first...forged a-arms. The one-piece, forged a-arms are lighter (approximately 1.5 lbs lighter) while providing optimal strength. Forging is widely used and proven through the automotive industry. This design reduces unsprung mass leading to a better ride quality and increased maneuvarability.
The PowderTrac™ running boards have been developed for maximum snow clean out and maximum strength. Built from extruded aluminum with bonded cast lugs, they boast an open area of over 50% and integrated traction that is machined in for sure footed performance. For 2016, we continued to refine and improve the running boards. There is now additional open space at the back of the boards by the rear pad to reduce snow build up.
All models built on the AXYS® platform feature standard LED headlights. LED headlights deliver the industry’s best lighting:
Another industry first for Polaris - the most advanced instrumentation in snowmobiling. This 4.3" high resolution, full color, LCD digital display provides a rider with information including: -Sled performance: Speedometer, tachometer, dual tripmeters, & odometer -Sled operating conditions: Fuel level, coolant temperature, diagnostics & maintenance warnings -Riding conditions: Time of day, Day/Night mode -Bluetooth™ functionality: Enables the display to communicate with the rider’s cell phone and provide notification of incoming calls or texts. Battery, signal strength. -GPS / Mapping Capability: A compass and full-featured GPS comes standard when the GPS receiver is installed. Latitude, longitude, and elevation are displayed, along with the ability to mark and save waypoints and tracks. -Vehicle Immobilizer and security function allow you to lock your vehicle with a passcode. -Software can be upgraded during the life of the vehicle, so your display will never become outdated. -Screen options can be customized to suit rider preferences. This display is an option for SnowCheck Select 2016 and is also available as an accessory option for all AXYS® models as well as PRO-RIDE™ models when used with the accessory Defrost Bag.